Bible restoration

 
 

from large victorian family bibles to tiny prayer books

On average we restore three or four Bibles of different shapes and sizes throughout the course of any given month. We have restored hundreds of Bibles over the years making us experts in bringing back what some would consider beyond saving.

If you are looking at this page with a potential restoration in mind then we are sure you will recognise one or more of the problems below.


common problems

When contacting us about a restoration these pictures can be a useful guide when describing the damage to us.


tools and techniques

20210720_112648.jpg

tooled spine

When the original spine is missing or beyond saving the new leather is tooled to match.

20210720_114933.jpg

dyes and conditioners

We use many different products to restore leather bindings.

20210720_113446.jpg

page repairs

When pages are repaired the tissue used is barely noticeable, but the strength and durability it provides is invaluable.

20210720_104104.jpg

brass handle tools

Traditional brass handle tools are heated on a stove to apply the gold or blind embossing.

20210720_112359.jpg

lettering pieces

If a Bible has a lettering piece that is beyond saving then we replicate it as closely as possible.

20210721_150940.jpg

spares

We keep all unused parts of Bibles when replacements copies are sourced. Blank family history pages, brass edging and clasps and even complete boards.

DSC_2532.JPG

brass clasps

We have access to a huge range of brass fittings. All reproductions of old designs. If a Bible is missing one or both clasps we can usually find suitable replacements.

20210622_083930.jpg

wooden boards

Some Bibles have wooden boards and there is usually some damage to the corners. Missing parts are filled and sanded before re-binding.

20210622_145532.jpg

colouring leather

Starting with a light tan aniline skin of leather we can dye each piece to the desired tone.

20210720_104534.jpg

little and large

You would think that working on a small book is easier, but that’s not the case. Small prayer books can be a lot more tricky to work on than large family Bibles.


CASE STUDY

17th Century Dutch New Testament

A small leather bound Bible with laced on wooden boards. The spine leather was missing completely and parts of leather on the front and back boards was also missing. The surface of the remaining leather has largely worn away and was very dry and fragile. One half of the original clasps still remained on the front board, but the other half of the clasps was missing.


reproducing an original spine design

The bottom image is of a Bible we re-bound in full leather. It came to us without a spine and very badly water damaged boards. We were given an image of an original spine and asked to reproduce it as closely as possible.

20210915_084701.jpg

brass tools

The decoration in the centre of the panels was made up of five different tools which we carefully chose to produce a similar design to the original. A dark green leather label was tooled similar to the image.


how long does a restoration take?

We like to allow two to three weeks for a restoration from the time we start the work to completion.

If you are interested in receiving a quote from us then a brief description of the damage and maybe a couple of pictures is enough for us to give you an idea of cost. We are happy to receive Bibles by post. We have customers all over the country.